02-17-2021 10:03 PM - edited 02-17-2021 10:06 PM
Hi, All
I have topology collaboration using CUCM and CUBE.
Endpoint - CUCM - CUBE - PSTN.
I tried to calls PSTN number, but i have error 501 not implemented.
Have you see problem sip error 501 not implemented? and how to solve it?
Please help, i attached my debug ccsip message on router. https://pendk.in/TrOg
Solved! Go to Solution.
02-18-2021 01:54 AM
Hi, All
So today i ready solve my issue , the problem is my CUBE need early-offer to send to provider. and after i add early-offer in my CUBE the calls is going normal.
Configuration document for early-offer force,
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/voi-cube-do-eo.html
Thanks all
02-17-2021 10:14 PM
Advice you to post the debug output in a file directly on the forum instead of on G drive where you would need to request access.
02-17-2021 10:50 PM
Hi, Roger.
Sorry for that. please check in here:
https://drive.google.com/file/d/1lsU3wnB8VPO-Kunwl7xusPrIBC9h8-oA/view?usp=sharing
and i also upload in forum
02-18-2021 01:54 AM
Hi, All
So today i ready solve my issue , the problem is my CUBE need early-offer to send to provider. and after i add early-offer in my CUBE the calls is going normal.
Configuration document for early-offer force,
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/voi-cube-do-eo.html
Thanks all
02-18-2021 02:53 AM
Glad you managed to solve it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide