Would like to configure a SIP Phone with a PLAR on Button 1 and the Extension Mobility service on Button 2. SIP Dial Rule for Button 1 to handle the PLAR works as expected when logged out. However, once a Device Profile logs in, the SIP Dial Rule still takes over Button 1 and the user's extension doesn't get Dial Tone and can't make calls.
I'm not too familiar with SIP Dial Rules... Can someone help me understand what's happening when I take the Device Profile's line off-hook and just hear dead air until the inter-digit timeout kicks in? Is there something I'm missing with regards to the Dial Parameters which would allow a non-PLAR extension on Button 1 to get dial tone and bypass the SIP Dial Rule configured on the device?
Thanks in advance,
Joe