Hello,
I have a CUCM 8 with an MGCP 2921 voice gateway.
To the gateway i have connected an E1 and a couple of PSTN lines.
This all works well.
Now the company has aquired a couple of SIP accounts.
My problem is that i dont find a decent example or guide to configure these SIP trunks with our infrastructure.
I know that i need to configure a sip trunk from the CUCM to the voice gateway and on the voice gateway configure the SIP accounts.
Can someone send me a link to a configuration example or guide that can help me do this?
Thank you,
Laszlo
