Hi!
I've configured T37 on-ramp on an 2811 with ios 12.4.15T8 and all works fine.
with long faxes it took up to 1700 sec (e.g with 20 pages) to receive a fax.
Is it possible to speed up the transfer?
Here's the config:
fax receive called-subscriber $d$
fax interface-type fax-mail
mta send server 10.10.10.5 port 25
mta send subject "Cisco-powered Fax System"
mta send postmaster postmaster@mtelco.com
mta send mail-from hostname 12900.scanfax01.mtelco.com
mta send mail-from username $s$
!
application
service app_faxmail_onramp flash:app_faxmail_onramp.2.0.1.3.tcl
!
dial-peer voice 40 pots
description ***** fuer FAXtoMAIL*****
service app_faxmail_onramp
incoming called-number 2600[34]T
direct-inward-dial
!
dial-peer voice 41 mmoip
description ***** fuer FAXtoMAIL zum SMTP *****
service fax_on_vfc_onramp_app out-bound
max-conn 5
destination-pattern 26003
information-type fax
session target mailto:test1@mtelco.com
!
dial-peer voice 42 mmoip
description ***** fuer FAXtoMAIL zum SMTP *****
service fax_on_vfc_onramp_app out-bound
max-conn 5
destination-pattern 26004
information-type fax
session target mailto:test2@mtelco.com
