testing Cisco IP phones with remote control

[ctr000001]

Hi all - We are writing some test programs that need to provision, make/answer calls on a set of different model Cisco VoIP(SIP) phones and are looking for the easiest way to automate this. Are there some references available that can show different ways to accomplish this? Is there a web interface or CLI interface or restful interface available on Cisco phones that can be used to control the phones? Do they support cURL for example? 

Many thanks for your guidance in advance.

Chuck

[mathewlouis]

You might check out Cisco DevNet for this

https://developer.cisco.com/site/ip-phone-services/overview/

https://developer.cisco.com/fileMedia/download/0d2f0d08-c7a4-48b9-8bc2-0bf69ab27382

[mathewlouis]

Also there are some companies that make programs that do this type of thing...

http://www.unifiedfx.com/products/phoneview/

https://www.singlewire.com/free-xml-apps.html

[Ramy Dawoud]

please check

http://codingofthings.com/Apps/Index/13

for bulk remote control , you can select multiple phone to control at the same time.