Time period based on date range not working?

[esther.tan]

Hi

Anyone can advise why time period set based on date range doesn't work?

Eg. If I create a TP with year on Dec 28 (one day only), it works.  but when i set TP based on year on Dec 28 until Dec 30, it won't work.

What is the purpose of the "Year On XX XX Until XX XX" used for?

I am on CUCM 8.5.

Thanks

Esther

[Marwan ALshawi]

The year on option specify a certain date or date range wherer the time time period will be applied

If you do not need it use repead every week and specify days range as per the below example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080a7bc96.shtml

https://supportforums.cisco.com/docs/DOC-8294

Hope this help

[esther.tan]

I need the date range because our client's office is closed for a week.  Since there is an option to state the date from when until when, we configured the range at the TP however it doesn't work.  We ended up configuring 7 TP with each date at each TP to achieve the same results.

We find it weird that the option to set date range is there but not working.