hi
I have a xcoder to convert between g711/g729.
in my test, a 7940 (sccp) and 8945(sip or sccp) in a region that only allows g729
the voip is a sip trunk that only accepts g711
if i call from 7940, the call is successful because is allocating the mtp xcoder to transcode the call
if i call from 8945, the call fails because is not allocating the mtp xcoder
i aslo have a sip trunk to another cucm cluster that is sending calls to my cluster using g729. calls fail too
any idea?
attached some logs too
Thanks
