08-27-2010 06:03 AM - edited 03-16-2019 12:30 AM
Hi, i have a little problem with some transfe call, the scenario is this:
i have 2 cluster CCM, the calls between them is established good in g.729, when one of the sides want to transfer the call to an external number (cel or lical, over pstn) when put transfer botton, the call with the other cluster is disconnected,
the 2 ccm cluster version is 6.1.3.1000-16
thanks for any help .
regards.
08-27-2010 06:25 AM
Seems like you might be having a problem establishing media... you may require a transcoder to be configured depending on the regions configured and what the devices support in the way of codecs.
--Matt
08-27-2010 06:37 AM
Just throwing it out there but if you have the know-how to run detailed traces do so while attempting to complete the transfer and you should see CallManager search the assigned DP->MRGL (if assigned) for transcoding resources (as Matt said) and then eventually fail and release the call. If that's the case it's more than likely a transcoding issue.
If you have available DSPs in your head-end gateways make sure they exist in an MRG/L accessible to the DPs of both the phones and trunks (on both sides).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide