12-13-2009 09:49 PM - edited 03-15-2019 08:47 PM
Hi All,
I have been reading up on configuring Dynamic Hunt Groups for a while today and I think i must be missing a step because I can't seem to get this feature to work in my lab. I have a client who would like to be able to log in and out of three different Hunt groups. So I thought i would try configuring one to start with. I have attached my config below:
telephony-service
max-ephones 110
max-dn 288
ip source-address 10.91.1.1 port 2000
system message Services Branch
load 7945 SCCP45.8-4-2S.loads
load 7965 SCCP45.8-4-2S.loads
time-zone 48
time-format 24
date-format dd-mm-yy
max-conferences 8 gain -6
hunt-group logout HLog
moh music-on-hold.au
web admin system name admin secret 5 $1$typo$R61e7Q.pbz/fe7GpVsFnS/
dn-webedit
transfer-system full-consult
fac standard
create cnf-files version-stamp 7960 Dec 14 2009 15:44:33
!
!
ephone-dn 1
number 1000
!
!
ephone-dn 2
number 1001
!
!
ephone-dn 3
number 1002
!
!
ephone-dn 98
number 1112
label reception broadcast
description reception
preference 2
ephone-hunt login
!
!
ephone-dn 99
number 1111
label reception broadcast
description reception
preference 1
ephone-hunt login
!
!
ephone 1
mac-address 0026.CB3B.480D
type 7945
button 1:1 2:98
!
!
!
ephone 2
mac-address 0027.0DBF.4CB1
type 7945
button 1:2 2:99
!
!
!
ephone 3
mac-address 0027.0DBF.4DBE
type 7945
button 1:3
!
!
!
ephone 4
!
!
ephone-hunt 1 peer
pilot 1003
list *, *, *
As you can see I have created two ephone-dns for the hunt group:ephone-dn 98 and ephone-dn 99 and i have added these DNs to the 2nd button on two 7945s (ephone 1 & 2). Now my problem is the HLog button appears to be greyed out on both ephone1 & 2.
I think i might be missing something in regards to FAC. I have enabled FAC standard in the telephony service but i'm not 100% if i have this right.
Any help would be great.
Cheers!
12-14-2009 04:16 PM
OK i have spent heaps of time on this and lucky I'm not about to spend any more.
Theres a bug in the version of ISO i'm running. I'm running 12.4(24)T1
See below for link:
Guys make sure to click on the link which takes you to the list of known version which the bug has been found.
What a pain!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide