cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
734
Views
0
Helpful
2
Replies
Highlighted
Beginner

Unable to SSH CUCM 6.X remotely from a desktop.

Hi,

We have a setup where we are trying to SSH the CUCM 6.X but not able to access it.

We have checked our whole network and have enabled port 22 throughout the network.

Please suggest what may be the issue which is causing this?

Thanks !

2 REPLIES 2
Highlighted
Advisor

Could you provide more information on the error that you are receiving when you attempt to load an SSH session?

Some thoughts off the top of my head:

1. Check your local PC to see if you have a firewall program loaded that  could be blocking access.

2. Make sure your client supports SSH protocol version 2 and AES 128-bit encryption.

3. Look (or upload) a sniffer trace from the PC that is attempting the SSH session.

HTH.


Regards,
Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

Highlighted
Hall of Fame Cisco Employee

Have you tried rebooting the server just in case it's some service hanging?

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate