07-29-2013 03:56 AM - edited 03-16-2019 06:35 PM
Hi all,
I've configured a unified SRST with MGCP fallback and I think everything is configured properly, but phones never try to register With the SRST,
so, when I issue the command debug ephone detail. nothing appears.
I'm using CUCM 8.6.2 >> 10.10.50.8
gateway MGCP 2951 >> 192.168.93.2
and by the way that SRST is in the Local location not the remote one.
your help is much really appreciated
07-29-2013 04:00 AM
Hi
Please send the config done in your CUCM. Have you given config about your SRST ip address in CUCM SRST config.
Regards
Ronak Patel
Rate all helpful post by clicking stars below the answer.
07-29-2013 04:56 AM
Make sure the CME/SRST License is active. You can verify that by using the command show license detail cme-srst.
Hope this would help!
07-29-2013 05:16 AM
Hi Amine,
thank you so much for that.
here you are My license status t's active)
Feature: cme-srst Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 2 days
Period used: 1 day 2 hours
Transition date: Sep 26 2013 12:09:25
License Count: 95/0 (In-use/Violation)
License Priority: Low
Store Index: 7
Store Name: Built-In License Storage
07-29-2013 05:12 AM
Hi Norak,
thanks for your keen interest, the configuration done on my CUCM is
and that SRST is assigned to the Device pool which is assigned to that site phones.
07-29-2013 05:16 AM
hi
Send us sh telephony-service output.
Regards
Ronak Patel
Rate all helpful post by clicking stars below the answer.
07-29-2013 05:23 AM
Hi Ronak,
I'm not using CME SRST, I'm using unified SRST with MGCP Fallback.
the Telephony service isn't activated at all in unified SRST.
and here you are below my show call-manager-fallback result.
#sh call-manager-fallback
CONFIG (Version=9.0)
=====================
Version 9.0
Max phoneload sccp version 17
Max dspfarm sccp version 18
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
ip source-address 192.168.93.2 port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
max-ephones 85
max-dn 85 dual-line
max-conferences 8 gain -6
dspfarm units 0
dspfarm transcode sessions 0
huntstop
no huntstop channel
huntstop channel 0
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
moh music-on-hold
time-format 12
date-format dd-mm-yy
timezone 0 Greenwich Standard Time
no transfer-pattern is configured, transfer is restricted to local SCCP phones only.
cor incoming international 1 1001-1013
cor incoming international 2 1229,1257,1305,1280,1054,1077,12
cor incoming international 3 1304,1306,1130,1277,1101,2222,12
cor incoming longdistance 4 1103,1027,1029,1028,1031,1111,11
keepalive 30 auxiliary 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
system message primary SRST Fallback
Limit number of DNs per phone:
12SP: 76
7902: 76
7905: 76
7906: 76
7910: 76
7911: 1
7912: 76
7920: 76
7921: 76
7925: 76
7931: 76
7935: 76
7936: 76
7937: 76
7940: 76
7941: 76
7941GE: 76
7942: 1
7945: 76
7960: 1
7961: 76
7961GE: 76
7962: 1
7965: 76
7970: 1
7971: 76
7975: 76
7985: 76
anl: 76
ata: 76
bri: 76
CIPC: 1
vgc-phone: 76
IP-STE: 76
6921: 1
6941: 76
6961: 76
6901: 76
6911: 76
7926: 76
6945: 76
8941: 76
8945: 76
Log (table parameters):
max-size: 150
retain-timer: 15
transfer-system full-consult
transfer-digit-collect new-call
multicast moh 239.1.1.1 port 16384
local directory service: enabled.
Extension-assigner tag-type ephone-tag.
Appreciated
07-29-2013 05:27 AM
Sorry My mistake.. I just wanted that output. Instead of SRST i gave CME command.
Regards
Ronak Patel
Rate all helpful post by clicking stars below the answer.
07-29-2013 07:35 AM
No worries Ronak,
Have you found anything yet?
By the way, that SRST is configured as an mgcp gateway, and all the FXO ports are registered.
Sent from Cisco Technical Support Android App
07-29-2013 09:34 PM
Hi Gents,
there is something I'm suspecting in which is related to my license
when I do #show license detail, I got these results.
SUK-Router#sh license all
License Store: Primary License Storage
StoreIndex: 0 Feature: ipbasek9 Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
License Store: Built-In License Storage
StoreIndex: 0 Feature: securityk9 Version: 1.0
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
License Type: EvalRightToUse
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 2 Feature: datak9 Version: 1.0
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 3 Feature: gatekeeper Version: 1.0
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 4 Feature: SSL_VPN Version: 1.0
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: 0/0 (In-use/Violation)
License Priority: None
License Type: EvalRightToUse
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 2 days
Period used: 1 day 3 hours
Transition date: Sep 27 2013 03:12:31
License Count: 95/0 (In-use/Violation)
License Priority: Low
Store Index: 7
Store Name: Built-In License Storage
is it ok this way that I'm having SRST License now, or not, because I see it's just an evaluation, and I see also two indexes for uck9 feature one of them is permanent and the other is for evaluation.
what does that means? and is that might be causing my case?
07-29-2013 09:43 PM
hi
I feel the licensing is correct. Have you restarted the router after you have accepted EULA.
Send us the output of debug ephone detail when the phones try to register to the SRST router.
Regards
Ronak Patel
Rate all helpful post by clicking stars below the answer.
08-12-2013 05:15 AM
Hi Ronak,
I just resolved the Issue, by removing the ip source-address command and put it again.
Thanks for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide