cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
551
Views
10
Helpful
4
Replies

Upgrade CUCMBE

mwheinz
Beginner
Beginner

If I apply a CUCM patch to CUCMBE version 7 during install, does this upgrade the Unity Connection application, too? Cisco site is totally vague on how to upgrade CUCMBE. Does anyone know how to upgrade/patch CUCMBE?

Thanks!

1 Accepted Solution

Accepted Solutions

knovak123
Beginner
Beginner

Answer is yes, both apps upgrade at same time.

Worked with an engineer about a year ago on this.

His reply below:

Hey Kevin,

So the upgrades and installs are all from the same source ISOs as CUCM. So if you're upgrading CUCM 6.0 to 6.1 or CMBE 6.0 to 6.1 or even CUC Standalone 2.0 - 2.1 then you'll use the same upgrade. You'll notice that if you go to the CUCM upgrade or the CUC upgrade sw pages that the same files with same size are there even though CUC says version 2.1 and CUCM says version 6.1:

http://www.cisco.com/cgi-bin/tablebuild.pl/unityconnection

UCSInstall_UCOS_6.1.1.2000-3.sgn.iso_part2of2

Cisco Unity Connection 2.1(1) Part 2 of 2 (non-bootable) - For upgrade from 2.1(1) 2.1(1) 23-JAN-2008 1221413888 UCSInstall_UCOS_6.1.1.2000-3.sgn.iso_part1of2

Cisco Unity Connection 2.1(1) Part 1 of 2 (non-bootable) - For upgrade from 2.1(1) 2.1(1) 22-JAN-2008 1221413888

http://www.cisco.com/cgi-bin/tablebuild.pl/callmgr-61

UCSInstall_UCOS_6.1.1.2000-3.sgn.iso_part1of2

Cisco Unified Communications Manager 6.1(1a) part 1 of 2 (non-bootable) - For upgrade from 6.0(1) 6.1(1a) 14-JAN-2008 1221413888 UCSInstall_UCOS_6.1.1.2000-3.sgn.iso_part2of2

Cisco Unified Communications Manager 6.1(1a) part 2 of 2 (non-bootable) - For upgrade from 6.0(1) 6.1(1a) 14-JAN-2008 1221413888

So to recap every CUCM install or upgrade image/dvd whatever will always have CUCM/CMBE/CUC sw.

Pls let me know if this answers your question.

Rgds,

Gert

View solution in original post

4 Replies 4

knovak123
Beginner
Beginner

Answer is yes, both apps upgrade at same time.

Worked with an engineer about a year ago on this.

His reply below:

Hey Kevin,

So the upgrades and installs are all from the same source ISOs as CUCM. So if you're upgrading CUCM 6.0 to 6.1 or CMBE 6.0 to 6.1 or even CUC Standalone 2.0 - 2.1 then you'll use the same upgrade. You'll notice that if you go to the CUCM upgrade or the CUC upgrade sw pages that the same files with same size are there even though CUC says version 2.1 and CUCM says version 6.1:

http://www.cisco.com/cgi-bin/tablebuild.pl/unityconnection

UCSInstall_UCOS_6.1.1.2000-3.sgn.iso_part2of2

Cisco Unity Connection 2.1(1) Part 2 of 2 (non-bootable) - For upgrade from 2.1(1) 2.1(1) 23-JAN-2008 1221413888 UCSInstall_UCOS_6.1.1.2000-3.sgn.iso_part1of2

Cisco Unity Connection 2.1(1) Part 1 of 2 (non-bootable) - For upgrade from 2.1(1) 2.1(1) 22-JAN-2008 1221413888

http://www.cisco.com/cgi-bin/tablebuild.pl/callmgr-61

UCSInstall_UCOS_6.1.1.2000-3.sgn.iso_part1of2

Cisco Unified Communications Manager 6.1(1a) part 1 of 2 (non-bootable) - For upgrade from 6.0(1) 6.1(1a) 14-JAN-2008 1221413888 UCSInstall_UCOS_6.1.1.2000-3.sgn.iso_part2of2

Cisco Unified Communications Manager 6.1(1a) part 2 of 2 (non-bootable) - For upgrade from 6.0(1) 6.1(1a) 14-JAN-2008 1221413888

So to recap every CUCM install or upgrade image/dvd whatever will always have CUCM/CMBE/CUC sw.

Pls let me know if this answers your question.

Rgds,

Gert

Thanks, this answers my question. You'd think that they would mention this on Cisco's site somewhere.

Thanks again,

Mike

I understand it's the same file for the upgrade.

But do we have to upgrade CUCM and Unity, or if we upgrade the CUCM it's gona upgrade the unity as well

One upgrade does them both on CUCMBE.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers