02-08-2012 03:47 AM - edited 03-16-2019 09:28 AM
hi all,
i want to pass the call to local DN and International number so i have created translation pattern like below
internal 2000 PT-line partition
TP : 2000 PT-line kept called party as 1XXXXX
i thought call will pass to internal and international simultenously but call is going to TP with touching internal numbers ...
Please guide me how send a call both internal and international simultenously...
Thanks
Karthik
02-08-2012 04:35 AM
to fork the call in the manner described you may want to look at the Mobile Connect (aka single number reach) feature.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_1/ccmfeat/fsmobmgr.html#wp1212169
Hth.
Regards,
Bill
Sent from Cisco Technical Support iPad App
Please remember to rate helpful responses and identify
02-08-2012 07:01 AM
Just FYI, that behavior is expected. CUCM uses best match routing and only upon equally good matches the partition order in the CSS is used. From what you're saying the partition from TP is above the one from the DN in the CSS.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide