03-08-2013 02:52 AM - edited 03-16-2019 04:09 PM
Hi Community.
I like to add a VG202 out of the box to the Cisco 2821 with 12.4(24)T2 CUCME 7.1(0).
Is that an easy step. Just get the Adapter out of the Box, connect to the Voice Network and add the ephone to the config. Like below ?
This is the config with an ATA 186 Adapter.
ephone 15
mac-address 001E.4A5F.D29C
max-calls-per-button 2
type ata
button 1:15
!
ephone 16
mac-address 1E4A.5FD2.9C01
max-calls-per-button 2
type ata
button 1:50
Thanks for your help and best regards patrick
Solved! Go to Solution.
03-09-2013 09:50 AM
Hi,
Take a look at this document, you'll find it really useful:
http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_tech_note09186a0080be0127.shtml
--
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
03-09-2013 09:50 AM
Hi,
Take a look at this document, you'll find it really useful:
http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_tech_note09186a0080be0127.shtml
--
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
03-15-2013 04:00 AM
Thanks that's a great document.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide