Hi All
I have just added a VG204 to my CUCM.
It is registered using SCCP.
We have a Tannoy system plugged into port 0/0 on the Gateway.
When we call the number, it rings twice and hangs up, could this be a config issue? or more likely the Tannoy system?
Config on the Gateway is below, Am I missing something?
stcapp supplementary-services
port 0/0
fallback-dn 2148
!
!
!
!
!
voice service voip
fax protocol t38 nse force version 0 ls-redundancy 0 hs-redundancy 0 fallback none
modem passthrough nse codec g711alaw
h323
!
voice-port 0/0
cptone GB
timeouts initial 60
timeouts interdigit 60
timeouts ringing infinity
!
mgcp fax t38 ecm
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
sccp local FastEthernet0/0
sccp ccm x.x.x.x identifier 30 version 7.0
sccp ccm x.x.x.x identifier 10 version 7.0
sccp ccm x.x.x.x identifier 12 version 7.0
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 10 priority 1
associate ccm 12 priority 2
associate ccm 30 priority 3
switchback method graceful
!
!
ccm-manager config
ccm-manager sccp local FastEthernet0/0
