Hi all.
I have a problem where the fxs ports in a VG224 just disapeared.
I can not configure a voice port any more. tried removing the VG224 from CUCM and adding it again doesn't work.
some show commands below.
Any idea to what could be the problem.
Thanks heaps.
Mohammed
=======================================================================
VG224#show voice port summary
IN OUT
PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC
========= == ============ ===== ==== ======== ======== ==
VG224#
VG224#show diag
Slot 0:
VG224 Motherboard 24FXS-2FE (3 onboard DSPs) Port adapter, 26 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
PCB Serial Number : FOC09336P13
Processor type : 7B
Top Assy. Part Number : 800-24228-02
Board Revision : A0
Fab Part Number : 28-5952-03
Deviation Number : 65535-65535
Manufacturing Test Data : FF FF FF FF FF FF FF FF
RMA Number : 255-255-255-255
RMA Test History : FF
RMA History : FF
Chassis Serial Number : FHK0937F139
Chassis MAC Address : 000c.863a.edce
MAC Address block size : 5
Field Diagnostics Data : FF FF FF FF FF FF FF FF
Hardware Revision : 4.0
Number of Slots : 1
Product (FRU) Number : unknown
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 30 39 33 33 36 50 31 33 09
0x10: 7B 40 04 5B C0 46 03 20 00 5E A4 02 42 41 30 85
0x20: 1C 17 40 03 80 FF FF FF FF C4 08 FF FF FF FF FF
0x30: FF FF FF 81 FF FF FF FF 03 FF 04 FF C2 8B 46 48
0x40: 4B 30 39 33 37 46 31 33 39 C3 06 00 0C 86 3A ED
0x50: CE 43 00 05 C5 08 FF FF FF FF FF FF FF FF 41 04
0x60: 00 01 01 FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
