Video calls between internal Cisco 8941 Phones and/or Jabber

[master002]

Hi all,

Recently there are new Cisco 8941 Phones and Jabber added to Cisco IPT system.

Just wonderring what the CUCM & phone configuration are required,  in order to make video calls between Cisco 8941 Phones and/or Jabber.

Any configuration and operation guide for this?    Thank you,

Master001

[Zekeria Sammantar]

Cisco 8941 phones cannot receive a video call but between jabber and jabber video is possible but only with Softphone mode.

First Configure the usuall cisco jabber deskphone to shareline with a physical phone

after follow the steps in the below link.

http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/mac/8.6/b_jabber_mac_admin_guide_chapter_010.html#task_A67673D507354D528CB4B8849B0D53C7

And

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmcfg/CUCM_BK_CDF59AFB_00_admin-guide-90_chapter_01101001.pdf

Please rate if info is useful.

[master002]

thanks for the reply Zekeria.  However, 8941 should be able to make and receive video calls.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps10451/ps11157/data_sheet_c78-649593.html

Just wonder if any configuratoin required in CUCM?    And the steps to establish video calls ?    as I don't have 8941 on my hand now.    Thanks!

[Zekeria Sammantar]

My bad, We have 9951 and 9971 and the only configurations changes that were made was to enable "Video Capability" Section in the phone or at enterprise phone parameters and they worked.