cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2715
Views
1
Helpful
7
Replies
Highlighted

Video intercom integration with Cisco 8800 series phones

Hello,

For a new project I am currently looking into video intercom options. I found the following which seems to be promising:

http://www.2n.cz/en/products/intercom-systems/ip-intercoms/helios-ip-verso/

I have seen a youtube video that shows how it works with a Cisco 9971: Cisco IP phone & IP door intercom live demonstration - YouTube

However, I am interested to know if this will work with the new Cisco 8800 series phones. I assume it will work with the 8845 and 8865 as those come with a camera, but will the other 8800 series phones be able to display a video stream?

Does anyone have any experience with the 8800 series phones and video display or even better with video intercoms?

Thank you,

Marco

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Video intercom integration with Cisco 8800 series phones

We were able to get our hands on a 2N intercom unit and I was able to test it with a Cisco 8845.

It works fine. The video starts immediately after the call has been picked up.

7 REPLIES 7
Cisco Employee

Re: Video intercom integration with Cisco 8800 series phones

Hi Marco,

I have seen video's like this in the past as well. This is not an officially supported use case, but users are doing it as shown here. The 88xx video phone 8845 and 8865 could theoretically do something like this as well, but again is not something we are calling out as a officially supported use case. To your point, the 8811, 8841, 8851, 8861 do not support video so they would not support this at all.

If you need more info feel to contact the IP Phone Team directly from our product pages:

Cisco IP Phone 8800 Series - Cisco

Thanks,

Mark

Re: Video intercom integration with Cisco 8800 series phones

Thanks Mark, that helps.

Re: Video intercom integration with Cisco 8800 series phones

We were able to get our hands on a 2N intercom unit and I was able to test it with a Cisco 8845.

It works fine. The video starts immediately after the call has been picked up.

Beginner

Re: Video intercom integration with Cisco 8800 series phones

Can someone point me in the direction of the documentation/instructions on how to get this setup in CUCM and on the phone configuration?  We have a different brand SIP intercom (Axis A8105-E) that we want to use for this function.

Beginner

Re: Video intercom integration with Cisco 8800 series phones

I'm looking for documentation on this as well.

Beginner

Re: Video intercom integration with Cisco 8800 series phones

Hello Greg, I am on the same situation. Did you make that work? I have 8845 and 8945 with Camera but the Axis Intercom is not working for Video, only Audio. The IP phone displays a message about Video cannot be established with the remote device. if you get it please post it here. I´ll appreciate it
Contributor

Re: Video intercom integration with Cisco 8800 series phones

Marco,

We use 2n for door security and it works fine with the 8845, 9900 series and Jabber.  I've noticed it prefers g.711 since moving primarily to g.729 on my network so just allow your regions to throttle up to 64k and you'll be all set.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards