Hi Guys!!!!
I try to configure voice command under a privilege level. With others commands I don´t have problems, to configure with a privilege level, but command suchs , (id mac, busy trigger per button,voice-class codec 1) is imposible to me.
I explain me:
I have a CME configured with voice register pool configurated to SIP IPPHONES and I need to an user with level 8 can change the id mac of voice register pool 1 for excample:
voice register pool 1
busy-trigger-per-button 3
id mac AAAA.AD31.A9E2 ------> CHANGE FOR NEW MAC EEEE.AD31.A9E2
number 1 dn 1
number 2 dn 1
dtmf-relay rtp-nte
voice-class codec 1
In my LAB only can change ID MAC with user with level 15, with other user is imposible to change it. I attach and image with posibilites with user level 8 and user level 15.
Also I have configure "privilege configure level 8 voice register pool 1" "id", but does not work.
Anybony if command "id mac" is only changealble for 15 level user?
I hope to explain me
Br