em 08-26-2019 01:39 PM
I just received a Cisco 7945, and installed the SIP firmware on it, as I am going be using it at home with a SIP system there.
Is there way I can make changes to the phone as far as SIP settings/NTP/button options via a web interface? I am able to see the phone via the IP in Chrome, but I don't see anything that will allow me to make changes.
Is this possible? If so, how?? :)
Thanks a bunch
em 08-26-2019 02:18 PM
No, there is no way to do that.
Only recent phones like the 88xx and 78xx AND when you buy the 3PCC/MPP variant have a web gui for configuration.
Any other phone model that is not a 3PCC/MPP model, it's all based on .xml config files.
em 08-26-2019 11:41 PM
em 08-27-2019 07:03 AM
Downloaded the SIP firmware from Cisco and put it on the TFTP server, set the TFTP server IP on the phone and let it connect and download the new firmware.
em 08-28-2019 12:36 AM
Descubra e salve suas ideias favoritas. Volte para ver respostas de especialistas, passo a passo, tópicos recentes e muito mais.
Novo por aqui? Comece com estas dicas. Como usar a Comunidade Guia do novo membro