Resolved! IPv6 traffic marking on SCE8000
Hello!Is it possible to mark IPv6 traffic with DSCP on SCE8000 with latest SCOS 3.8.5?
Hello!Is it possible to mark IPv6 traffic with DSCP on SCE8000 with latest SCOS 3.8.5?
Hi,I am trying to setup a small IPv6 lab with a Switch, Firewall & Router. Switch having one LAN segment & Router having one LAN segment between them there is a firewall and after all configurations setup Im tried to reach router LAN(2001:610:2222:2)...
Following is the output from show buffers input-interface gigabitEthernet 2/0/0 packetafter analyzing this packet i found following fields important. 00:1C:F6:22:E9:54 - DST mac address01:AD:DE:AD:DE:AD - SRC mac address 37 : ICMP 87 : Neighbor Soli...
Hi,I have one question about IPv6 and DMVPN. Let's assume we have a DMVPN Hub Site running IPv6 IP addresses on the WAN Interfaces and Spoke Sites running either IPv4 or IPv6 IP adresses on their WAN Interfaces.In IPv4 only Networks, the Tunnel Konfi...
Hello,I have established IPV6 bgp sessions with ipv6 prefix-list filter. But ipv4 routes were advertised over this bgp session. Do I I need special configuration under address family or ipv4 prefix-list filters required ?Note : the config was IBGP b...
Hi All,For IPv6 testing we configured loopback addresses with prefix starting with 2002.Necessary routing was configured as per requirement.Butunfortunately we were not able to ping the loopback ip address from remote subnet.When i...
Hi all,do you have any information when the OSPFv3 IPSec authentication will be supported on Catalyst 4900M? Thank you.Roman
Hi,i am trying to configure hsrp with ipv6 and all command are running for hsrp excep this command standby 1 ipv6 2001::10/64 and i have also tried standby 1 ipv6 2001::10, then showing error:- % invalid link-local address.i have also configred sta...
Hello,I'm an IT Student and I'm doing a final-study project about IPv6. In this projet I must configure 3 vlans and an internet Connection on a Cisco 3750G-PS-E switch. All intern VLAN must be connected to Internet and all VLAN can communicate togeth...
Consider a IPv4 SP that hosts customers Servers/WebSites. Today this SP has a LAN dedicated to these "SMB" clients, all "promiscuos" on the same LAN. Each customer has one IPv4 address, and can (via PAT) serve more than a physical "backend" Server.Th...
Hello Everyone.What is the best practice? Configuring a static link-local address on the interface, or letting the router pick an eui-64 one?From a dynamic routing process point of view, does it really matter which type of link local address is used ...
Hi,In IPV4 DHCP sever use command for exclude address this command [ip dhcp excluded-address]. then which commman use in IPV6 for exclude some address. could any one help me on this.
Hi,I am trying to configure DHCPv6 pool in my cisco 3560 switch but failed.Can somebody please help me in configuring it with some example.Thanks,Jermy
Good morning everyone,I need to find this address:fe80::404d:9415:115a:f39cIt looks like a link local address. But there is no ffee inserted between the 6th and 10th bits where the mac address would be inserted. Can I find the mac address from this...
Dears,I have established iBGP seesion between 2 routers (R1 ---- R2) and I want to advertise loopback interface /128 using ipv prifex filtering, but didnt advertise to neighbor loopback . it is working fine with network or redistribute command but...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
06-17-2024 02:41 AM | ||
03-31-2024 01:57 PM | ||
03-24-2024 10:31 PM | ||
02-24-2024 03:18 PM | ||
01-29-2024 05:16 AM |