11-01-2012 10:50 PM - edited 03-01-2019 05:37 PM
Hi Experts (Only Experienceholders),
What is exact address format of IPv6 to assign to any
Router or computer / Laptop ? I have seen many posts
and online articles where information about IPv6 is not
clear. I am giving here some examples like as
IPv6 address = 2001:0DB8:1111:2222::1/64
(in this example, there are only 5 octet and sign :: comes in last)
IPv6 address = fe80::2e0:b6ff:fe01:3b7a
(in this example, there are only 5 octet and sign :: comes in starting)
IPv6 address = 2001:410:1:2:212:43FF:FEE3:C600
(in this example, there are 8 octet and no :: sign)
11-01-2012 11:55 PM
IPv6 address is of 128 bit length (or 8 octect length). Inorder to have it user friendly (to some extent), the text representation is defied in a way that concecutive zeros can be denoted with :: symbol.
For example, 2001:0DB8:1111:2222::1/64 is actually 2001:0DB8:1111:2222:0000:0000:0000:0001/64
Similarly, fe80::2e0:b6ff:fe01:3b7a is actually FE80:0000:0000:0000:02e0:b6ff:fe01:3b7a.
Below RFC will give you a better understanding on the text representation,
11-02-2012 12:08 AM
You mean to say, i can put any one of them in address field
of Pc/Laptop or Router interface whether it is 5 octet or 8 octet.
am i right ? plz give me confirmed final answer.........
11-02-2012 04:24 AM
Scenario 1: Apply IPv6 Global address to router interface, V6 Link-local is auto generated.
Scenario 2: Apply IPv6 Global address and link-local to router interface.
For more info on V6 addressing, refer
Hope this clarifies your doubt.
Please rate the content, if you find the content helpfil.
11-02-2012 08:35 AM
why Global Address and Link-local ip address different ?
can i configure router interface ip without link-local ?
11-02-2012 01:35 PM
The link-local IP address is used for point to point communication between adjacent interfaces. When you enable v6, the router will generate a link local address for each v6 enabled interface automatically. IPv6 requires a link local ip on each active interface; it's used for neighbor discovery at the very least.
The equivalent in IPv4 is the 169.254.0.0 subnet that gets assigned when you boot up a machine without any network connectivity. However, in v6 it is not optional and does not go away when a global address gets assigned.
Beyond the resources others have provided above, you might have a look at the general description of IPv6 at http://en.wikipedia.org/wiki/IPv6_address.
11-06-2012 04:38 AM
Good question. Link local address has a scope defined, which is to the link only. Any packet forwarded to the link local address will not be forwarded ahead by the receiving device. I really appreciate the concept of link local address in IPv6 as it removes lot of confusion and is pretty straight forward. The concept of knowing link local address is pretty important as some routing protocols use link local address as next hop to reach a destination.
If you really want to clear your concepts on IPv6 in a way that it helps you to implement the protocol, I would recommend you studying the CCNP Route official study guide written by Wendell Odom. It's really good and I really like it.
12-08-2012 12:01 PM
ipv6 is not like ipv4 I try to explan you first task in ipv6 is that
it is 128 bit
in ipv6 0000:0000:0000:0000:0000:0000:0000:0000
in ipv4 0.0.0.0
number starts with 2001 or 2002 is just like starting number 192 in ipv4
u can write 2001:0:1111:2222:3333:4444:5555:6666
2nd eg: 2001:0000:0000:1111:1111:2222:3333:4444
u can write 2001::1111:1111:2222:3333:4444 (here u find only 6 places)
:: you can use only one time
01-28-2014 04:34 AM
Why we use 4 in IPv4 and 6 in IPv6. what is logic behind this ?
01-29-2014 09:27 PM
4 and 6 are ip version. Better you get CCNA level knowledge
01-30-2014 02:49 PM
Internet protocol version 1-3 were lab-only; version 4 is the experiment that build the modern internet; 5 was a real-time streaming idea which never got any traction, and 6-9 were candidates to replace 4, with the winner being 6, "simple internet procotol plus". The simple part is the v6 is still packet-switched, next-hop routed, best-effort delivery like v4, only with 128 bit addresses. The plus part is more complicated (neighbor discovery, new multicast design, mobility enhancements, IPsec, ...).
Anyway, the successor to IPv4 is IPv6, and any future successor to 6 would be IPv10 or larger.
-- Jim Leinweber, WI State Lab of Hygiene
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: