Hi Guys,
I am just new to IPv6 and tried to test in the packet tracer. I configured the IPv6 pool, interface configuration on the router and then at the client end getting the dns server & domain name only. IPv6 address not coming up. Can you check the below configuration and debug results what is missing?
Configurations:
ip cef
ipv6 unicast-routing
!
ipv6 dhcp pool Lan1
address prefix 2222:222:22::/64 lifetime 172800 86400
dns-server 2222:222:22::10
domain-name test.test
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
ipv6 address 3333:333::1/64
ipv6 nd managed-config-flag
ipv6 dhcp server Lan1
DHCP#sh ipv6 dhcp pool
DHCPv6 pool: Lan1
Address allocation prefix: 2222:222:22::/64 valid 172800 preferred 86400 (0 in use, 0 conflicts)
DNS server: 2222:222:22::10
Domain name: test.test
Active clients: 0
Debug Output:
*Mar 1 00:45:23.292: IPv6 DHCP: Received REQUEST from FE80::290:21FF:FE82:36E6 on GigabitEthernet0/0
*Mar 1 00:45:23.292: IPv6 DHCP: detailed packet contents
*Mar 1 00:45:23.292: src FE80::290:21FF:FE82:36E6 (GigabitEthernet0/0)
*Mar 1 00:45:23.292: dst FE80::201:63FF:FE66:D501 (GigabitEthernet0/0)
*Mar 1 00:45:23.292: type REQUEST(3), xid 11
*Mar 1 00:45:23.292: option ELAPSED-TIME(8), len 6
*Mar 1 00:45:23.292: elapsed-time 0
*Mar 1 00:45:23.292: option SERVERID(2), len 24
*Mar 1 00:45:23.292: 0003000100016366D501
*Mar 1 00:45:23.292: option CLIENTID(1), len 45
*Mar 1 00:45:23.292: 00-01-00-01-A4-E0-CB-39-00-90-21-82-36-E6
*Mar 1 00:45:23.292: option ORO(6), len 10
*Mar 1 00:45:23.292: IA-PD, DNS-SERVERS, DOMAIN-LIST
*Mar 1 00:45:23.292: option IA-PD(25), len 45
*Mar 1 00:45:23.292: IAID 0x8045, T1 0, T2 0
*Mar 1 00:45:23.292: option IAPREFIX(26), len 29
*Mar 1 00:45:23.292: preferred 0, valid 0, prefix 0.0.0.0/0
*Mar 1 00:45:23.292: IPv6 DHCP: Using interface pool Lan1
*Mar 1 00:45:23.292: IPv6 DHCP: Creating binding for FE80::290:21FF:FE82:36E6 in pool Lan1
*Mar 1 00:45:23.292: IPv6 DHCP: Allocating IA_PD 8045 in binding for FE80::290:21FF:FE82:36E6
*Mar 1 00:45:23.292: IPv6 DHCP: Allocating prefix 0.0.0.0/0 in binding for FE80::290:21FF:FE82:36E6, IAID 8045
*Mar 1 00:45:23.292: IPv6 DHCP: Sending REPLY to FE80::290:21FF:FE82:36E6 on GigabitEthernet0/0
*Mar 1 00:45:23.292: IPv6 DHCP: detailed packet contents
*Mar 1 00:45:23.292: src FE80::201:63FF:FE66:D501 (GigabitEthernet0/0)
*Mar 1 00:45:23.292: dst FE80::290:21FF:FE82:36E6 (GigabitEthernet0/0)
*Mar 1 00:45:23.292: type REPLY(7), xid 11
*Mar 1 00:45:23.292: option SERVERID(2), len 24
*Mar 1 00:45:23.292: 0003000100016366D501
*Mar 1 00:45:23.292: option CLIENTID(1), len 45
*Mar 1 00:45:23.292: 00-01-00-01-A4-E0-CB-39-00-90-21-82-36-E6
*Mar 1 00:45:23.292: option IA-PD(25), len 41
*Mar 1 00:45:23.292: IAID 0x8045, T1 0, T2 0
*Mar 1 00:45:23.292: option IAPREFIX(26), len 29
*Mar 1 00:45:23.292: preferred 0, valid 0, prefix 0.0.0.0/0
*Mar 1 00:45:23.292: option DNS-SERVERS(23), len 20
*Mar 1 00:45:23.292: 2222:222:22::10
*Mar 1 00:45:23.292: option DOMAIN-LIST(24), len 5
*Mar 1 00:45:23.292: test.test
