Hi everyone,
We are currently testing a solution for IPv6 satellite offices over an IPv4 MPLS backbone. The test bed is three 2921 routers running MPLS with OSPF as the IGP. We would like to accomplish this using 6PE but are having issues setting up the test per this document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-over_mpls.html#wp1036720
Notably, the "tag-switching tdp router-id Loopback0" on our core router which is a 2921.
Does the 2921 not support this command? If no, what command would be equivielent or is the 2921 just not capable of running as an MPLS core.
Thank you.
