03-30-2023 06:11 AM
When i want to turn on prefix delegation on my router the prefix state stays in Prefix State is SOLICIT instead of OPEN.
GigabitEthernet0/0/0 is in client mode
Prefix State is SOLICIT (3)
Retransmission timer expires in 00:00:03
Address State is IDLE
Prefix Rapid-Commit: disabled
Address Rapid-Commit: disabled
Commands:
(config-if)#ipv6 enable
(config-if)#ipv6 address autoconfig default
(config-if)#ipv6 dhcp client pd FROM-ISP
03-30-2023 07:03 AM - edited 03-30-2023 07:05 AM
Hi @Rottot ,
It looks like you are not receiving any dhcpv6 messages back from your provider. Are you certain they offer dhcpv6 at all?
Can you try getting a dhcpv6 address from them by configuring the following command:
int xxx
ipv6 address dhcp rapid-commit
Regards,
03-30-2023 07:25 AM
The interface has received an ipv6 address via dhcpv6. Also I tried to configure prefix delegation with the exact same commands 2 weeks ago. Back then everything worked fine but now it switched to SOLICIT.
Regards
03-30-2023 07:29 AM
Hi @Rottot ,
If that was working 2 weeks ago and not working now with the exact same config, I would suggest you reach out to your service provider to see if they can help.
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide