cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
566
Views
3
Helpful
4
Replies

MediaSense with JTAPI?

Is anyone using JTAPI to fork a media stream from IP Phone to MediaSense?  I'm looking into CiscoTerminalConnection->addMediaStream.

I'm not quite sure what streamDN means here.  "A String object representing the DN of the endpoint that will be streaming media to this call. This is usually an IVR or CTI Port."

Am I headed in the right direction here?  Is there a CTI Port for Media Sense?

CiscoTerminalConnection ->

addMediaStream
void addMediaStream(java.lang.String streamDN,
                    java.lang.String callingPartyNumber)
                    throws javax.telephony.PlatformException,
                           javax.telephony.InvalidStateException,
                           javax.telephony.ResourceUnavailableException,
                           javax.telephony.InvalidArgumentException

Adds a Media Stream to this call, using the CiscoTerminalConnection object that invoked this API. A second, background call will be placed to the DN specified by the IVRDN parameter, and this call will be mixed in to the invoking CiscoTerminalConnection's Built-In-Bridge.

Parameters:
streamDN - A String object representing the DN of the endpoint that will be streaming media to this call. This is usually an IVR or CTI Port.
callingPartyNumber - A String object representing information that will be shown as the calling party number to the streamDN when the call is initially offered to it.

1 ACCEPTED SOLUTION

Accepted Solutions
Frequent Contributor

Re: MediaSense with JTAPI?

Yes but it’s really Callmanager (CUCM) that is actually handling the request. A JTAPI application would instruct CUCM to
invoke recording on the BiB (and gateways, starting CUCM 10.0). CUCM will send
a SIP invite to MediaSense, which will then consume RTP streams from the ‘media forking point’ (BiB or Gateway).

JTAPI

View solution in original post

4 REPLIES 4
Frequent Contributor

Re: MediaSense with JTAPI?

Yes but it’s really Callmanager (CUCM) that is actually handling the request. A JTAPI application would instruct CUCM to
invoke recording on the BiB (and gateways, starting CUCM 10.0). CUCM will send
a SIP invite to MediaSense, which will then consume RTP streams from the ‘media forking point’ (BiB or Gateway).

JTAPI

View solution in original post

Highlighted

Re: MediaSense with JTAPI?

Thanks!  I actually found the "startRecording" on the ciscoTerminalConnection that did exactly that.  Simple code, and everything was handled through pre-defined CUCM configuration.

I'm struggling a bit now, trying to find a way to stop a recording.  We're using Media Sense 8.5, and the MediaSense API is failing for some reason when I call stopRecording - without any detail in the response (it just says "API call failed, please verify the deviceRef...", but inputs are fine. I can query other active recordings and find it on that same deviceRef).  My best guess is that the originator (i.e. CUCM) is the only one allowed to stop the recording.  This seems a bit strange to me, because telling MediaSense to stop recording - since it's actually doing the recording - it should definitely know how to not continue to record - even if the stream is still coming in.

Anyway, assuming this is true, and I need to call JTAPI to stop the recording, any hints at where I should look for this API call?  Intuitively, it seems like it should have been "stopRecording" - or "terminateRecording" on the same ciscoTerminalConnection object.  But I don't see anything like that.  Any advice/help would be very much appreciated.

Frequent Contributor

Re: MediaSense with JTAPI?

Since you startRecording via JTAP I suggest you post your question about stopping the recording in the JTAPI forum here

https://communities.cisco.com/community/developer/collaboration/call-control/jtapi

Re: MediaSense with JTAPI?

Ok, thanks!  On the MediaSense topic, do my assumptions about the failure in stopRecording through MediaSense sound correct?

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards
This widget could not be displayed.