09-12-2011 09:53 PM
Hi,
My customer has a question, what is the limit for entries for the route-map for PBR that will be done in hardware? This applies to soft-4900M 12.2 (53) SG2. I need a reference to documentation.
Regards,
lb
Solved! Go to Solution.
09-16-2011 04:39 AM
Hi Lukasz,
the 4900M is a Data Center Switch and not a Metro one, so it is more appropriate if you post these types of questions on Network Infrastructure > LAN Switching and Routing section
(the 4900M should not be confused with the ME4900 series, which are Metro switches instead).
Anyway it supports 128.000 Security and Quality-of-Service (QoS) Hardware Entries as documented here:
http://www.cisco.com/en/US/products/ps6021/prod_models_comparison.html
and here:
regards,
Riccardo
09-16-2011 04:39 AM
Hi Lukasz,
the 4900M is a Data Center Switch and not a Metro one, so it is more appropriate if you post these types of questions on Network Infrastructure > LAN Switching and Routing section
(the 4900M should not be confused with the ME4900 series, which are Metro switches instead).
Anyway it supports 128.000 Security and Quality-of-Service (QoS) Hardware Entries as documented here:
http://www.cisco.com/en/US/products/ps6021/prod_models_comparison.html
and here:
regards,
Riccardo
09-16-2011 10:25 PM
Thanks,
lb
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide