Provided L2VLL to metro customer. He is able to access all systems though it. But two linux systems have problem. Problem starts like this.
Location A ------------------------- Location B
From location A customer will initiate ping to Location B from two problem systems. We will see their MAC in Location A customer port and Location B trunk port. It is perfect, but after some time we will see the same MAC's on Location B customer port and systems loose ping response.
For this we have run wireshark in Location B customer port and observed 'gratuitous arp' causing this. How to resolve this issue. Can we do something on switches to prevent this problem. Customer doesn't have backup ISP link.
IOS-XR MPLS TE Auto Tunnel Backup Bandwidth Protection Current Implementation of MPLS TE Auto Tunnel BackupPotential issue with current implementation of MPLS TE auto tunnel backupEnhancement to MPLS TE auto backup in IOS XR 7.5.1Supported HardwareConfig ...
we are trying to monitor the Cisco 9148s SFP status, and have get the Sensor's dBm value from the CISCO-ENTITY-SENSOR-MIB table, meanwile , it has an Index value like "30000xxxx",such as "30001773", entsensorValueTable but we can't sure how to l...
Check out our latest release on Cisco Routed Optical Networking solution. Listen: https://smarturl.it/CCRS8E24Follow us: https://twitter.com/ciscochampion Disruptive network transformation may only happen once a decade. First movers c...
BGP flowspec in a nutshell is a feature that will allow you to receive IPv4/IPv6 traffic flow specification (source X, destination Y, protocol UDP, source port A .. etc) and actions that need to be taken on that traffic (drop, or polic...
In EVPN A/A + IRB both PE in same EVI have BVI playing a default GW role. Its not supported to have BVI to be shutdown on one of PEs, In this case if if traffic hit this PE with DMAc equal to BVI Custom MAC, then it will drop this traffic du...