05-04-2005 09:21 AM
Hello everyone
Plz move my topic to the relevant forum and lemme me know if this is not the place to get my answers.
Now my question
I want to know how an ISP works in detail and as much specific detail as it can get.( what exact equipments are used what's the process from A-Z etc)
anything N everything
I'll appreciate your help
I'm gonna appear for my CCNA this summer.
Btw i work in the Cisco network academy lab at my University (Sir Syed University Of Engineering & Technology ) and i'm final year student.
I broadly know how ISP works and i've to appear for an interview in two days' time.So i wannna give it my best shot.
I'll appreciate all the help i can get.
Thanks
Fahad
05-05-2005 04:17 AM
Hi Fahad,
You could check this link to see if the provider your interview is with has a Cisco powered network.
http://www.cisco.com/pcgi-bin/cpn/cpn_pub_bassrch.pl
You can use the fact that you work with some Cisco kit to your advantage.
In the ISP I work for our vendors include Cisco, Foundry Networks and some Extreme gear, it'll vary
from ISP but you should also get an idea from the
providers website about their network.
A lot will also depend on if your starting out in a help desk role or going to work in the ISP's NOC (Network Operations Centre) as this is were you get
to configure and support the network infrastructure.
Have a good grasp on Internet technologies DNS,FTP,IP Addressing/Subnetting,ARP etc and go in with a positive attitude and willingness to learn.
Very best of luck.
05-05-2005 06:29 AM
Peter,
I'm trying to duplicate an issue in a lab (not a production impacting issue, more for our Network management). We have two Data Centers, Data Center1 has one ISP one connection and Data Center2 has two ISP connections to two different ISP's. When we do maint. on Data Center2, we stop advertising BGP to both ISP's.
The issue is if we stop BGP only to one ISP, the router is still advertising. So what we have to do is remove BGP from both routers. We eventually would like to do is only remove BGP from one router.
My question is I almost have the lab configured exactly like production. I think I'm missing some BGP ISP configuration, can you help with this?
thanks,
Mario.
11-03-2005 04:01 PM
You might find BGP conditional statements helpful for your lab exercise, where you can advertise BGP to one ISP at a time.
http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094309.shtml
05-09-2005 07:06 AM
Check this out too:
http://navigators.com/isp.html
This certainly is not A-Z but may be B-C.
Good Luck.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide