cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1414
Views
0
Helpful
1
Replies

[solved]VPLS can not activate

yinan yang
Level 1
Level 1

Hello guys,

I meet a pretty strange problem. I use ME36600X to test the vpls. And i cant activate the vfi.It said "Maximum number of VFIs 0 have been configured."

And the other ME3600x have no problem at all.

Someone know where is the problem?

The two ME3600x have the exactlly same license and IOS version.

thanks!

3600-1(config)#l2 vfi test autodiscovery

Maximum number of VFIs 0 have been configured.

=========================

Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.2(2)S1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Tue 22-May-12 21:21 by prod_rel_team

ROM: Bootstrap program is WHALES boot loader

BOOTLDR: ME360x Boot Loader (ME360X-HBOOT-M), Version 12.2 [sourdutt-loader_release_ledfix 100]

3k1.me.rd uptime is 1 hour, 48 minutes

System returned to ROM by power-on

System restarted at 16:05:39 UTC Thu Aug 23 2012

System image file is "flash:/me360x-universalk9-mz.152-2.S1/me360x-universalk9-mz.152-2.S1.bin"

Last reload reason: Unknown reason

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

License Level: AdvancedMetroIPAccess

License Type: Permanent

Next reload license Level: AdvancedMetroIPAccess

cisco ME-3600X-24FS-M (PowerPC8572) processor (revision A0) with 1015808K/32760K bytes of memory.

Processor board ID FOC1615V1AY

Last reset from power-on

2 Virtual Ethernet interfaces

25 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

1536K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address       : F4:EA:67:B2:C1:80

Motherboard assembly number     :

Motherboard serial number       :

Model revision number           : A0

Motherboard revision number     : B0

Model number                    : ME-3600X-24FS-M

System serial number            :

Top Assembly Part Number        : 800-32951-01

Top Assembly Revision Number    : B0

Version ID                      : V01

CLEI Code Number                :

Configuration register is 0xF

==================================================================================

1 Reply 1

CSCO11777723
Level 1
Level 1

Cisco Bug CSCua05375, just change the sdm config to "default"

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: