hy guys,
i want to upgrade a cisco 12406 from IOS to IOS XR . there is someone who did already this ?
System image file is "disk0:c12kprp-p-mz.120-32.S3.bin"
GSR_12406#sh gsr
Slot 0 type = Performance Route Processor
state = ACTV RP IOS Running ACTIVE
Slot 1 type = Modular SPA Interface Card
state = IOS RUN Line Card Enabled
subslot 1/0: SPA-10X1GE (0x44D), status is ok
subslot 1/1: SPA-8XFE-TX (0x4C5), status is ok
subslot 1/2: Empty
subslot 1/3: Empty
Slot 2 type = Modular SPA Interface Card
state = IOS RUN Line Card Enabled
subslot 2/0: SPA-10X1GE (0x44D), status is ok
subslot 2/1: Empty
subslot 2/2: Empty
subslot 2/3: Empty
Slot 5 type = Performance Route Processor
state = STBY RP IOS Running STANDBY
Slot 16 type = Clock Scheduler Card(6) OC-192
state = Card Powered
Slot 17 type = Clock Scheduler Card(6) OC-192
state = Card Powered PRIMARY CLOCK
Slot 18 type = Switch Fabric Card(6) OC-192
state = Card Powered
Slot 19 type = Switch Fabric Card(6) OC-192
state = Card Powered
Slot 20 type = Switch Fabric Card(6) OC-192
state = Card Powered
Slot 24 type = Alarm Module(6)
state = Card Powered
Slot 25 type = Alarm Module(6)
state = Card Powered
Slot 28 type = Blower Module(6)
state = Card Powered
