Hello! how are you?
I need to control traffic on a pseudowire tunnel between 7600 and ASR 9000 router. We tried with a ping MPLS pseudo wire, but some packets are lost because acts control plane policing and we do not find a way to measure traffic in the tunnel. I think we could get the MPLS ping pw outside the cpp.
RP/0/RSP0/CPU0:CELMS02#ping mpls pseudowire 10.10.10.8 157602 repeat 70
Fri Jul 3 15:19:31.061 GMT
Sending 70, 100-byte MPLS Echos to 200.63.131.14 VC: 157602,
timeout is 2 seconds, send interval is 0 msec:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!
Success rate is 98 percent (69/70), round-trip min/avg/max = 2/2/3 ms
Thanks a lot!!