05-30-2013 02:55 AM
HI guys:
SPA-2X1GE-V2 module interface can work L2 switchport?Thank's
same:
!
interface GigabitEthernet5/1/1
switchport
switchport access vlan 20
switchport mode access
05-31-2013 02:03 AM
Hi there,
no the SIP400 cannot be configured as L2 switchport (it does not make any difference which SPA you actually use).
However you can have multipoint Layer 2 bridging service by using bridge-domain under service instance configuration (EVC)
something like:
interface GigabitEthernet5/1/1
service instance 1 ethernet
encapsulation dot1q 20
bridge-domain 20
Internally one bridge-domain is mapped to one of the 4K global VLAN resource; meaning that you still need a SVI for the L3 termination.
i.e:
Interfaca vlan 20
ip address 10.0.0.0 255.255.255.0
regards,
Riccardo
05-31-2013 03:06 AM
Thank U!
05-31-2013 03:31 AM
you are welcome.
please rate and close the question if useful
Riccardo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide