Cisco Router 12406 MPLS physical interface problem!

[vjfl0rin1]

I want to monitor a router interface with a NMS program, but i can't collect the data from this interface.

I was trying with:

snmpwalk  -v2c -c community 10.100.xxx.xx 1.3.6.1.2.1.2.2.1.19 the result was that is missing the oid named ifOutDiscards for the interface that i want to monitor.

How can i fix this problem?

[Giuseppe Larosa]

Hello Flo,

what kind of interface is this ? is it a POS Sonet/SDH interface?

my guess is that ifOutDiscards may be related to LAN type interfaces

"The number of outbound packets which were chosen to be

discarded even though no errors had been detected to prevent

their being transmitted.  One possible reason for discarding

such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

ifCounterDiscontinuityTime."

Actually from description it looks like the variable should apply also to POS interfaces

see

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.2.1.2.2.1.19&translate=Translate&submitValue=SUBMIT

you can also check the supporting images from the link above

Hope to help

Giuseppe

[vjfl0rin1]

Cisco XR 12000 Series Router

MPLS interface, SDH.

[Alessio Andreoli]

Check again the configuration since a few defaults can be different in IOS XR.If you post it we can helps little bit more

Alessio

Sent from Cisco Technical Support iPad App