01-18-2017 01:29 AM
Hello all,
I have implemented a PPPoE authentication (PPPoe Client and Server [NAS]) in GNS3 using freeRADUIS, and i want also to send a route with RADIUS,but i don't know what is the purpose and the advantage of using or injecting static route with RADIUS.
Thanks in advance
Best regards
02-11-2017 04:06 PM
the advantage of user static route by AAA radius server for MPLS l3vpn , when the user (pppoe client ) connect to PE router (work as BRAS) , you can add static route dynamically by AAA for the networks that behind the CPE and assign the user inside vrf , for radius configuration :
user@cciesyria.sy Cleartext-Password := "cisco"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 172.16.3.33,
Framed-IP-Netmask = 255.255.255.0,
Cisco-AVPair += "lcp:interface-config#3=ip vrf forwarding a",
Cisco-AVPair += "lcp:interface-config#4=ip unnumbered Loopback0",
Cisco-AVPair += "Ip:route#5=4.4.4.0 255.255.255.0",
Cisco-AVPair += "ip:route#6=5.2.0.0 255.255.255.0",
i hope the answer helpful for you
11-02-2018 07:42 AM
It permit you also a quick deployment and no need to use a IGP between PE and CE
When you injecting route from the Radius it also easy to maintain and permit to have a very small CE routing table
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide