I wanted to create PE to PE traffic engineered tunnels with guaranteed bandwidth using mpls experimental bits. On ingress PE i am mapping all traffic in to four classes Platinum (EXP 5) , Gold (EXP 4), Silver (EXP 3), Bronze (EXP 2). All core interfaces are 10Gbps and egress scheduling configured for platinum- 2.5Gbps, gold- 2.5Gbps, silver- 2.5Gbps, bronze- 2.5Gbps.
Ingress to egress dynamic tunnel has to establish with guranteed bandwidth for platinum traffic 2.5Gbps. For four types of traffic I required 4 LSPs from ingress to egress.
Can this requirement be done by diffser-te in cisco? If possible, please suggest helpful docs for configuration.
Below is a link to a video showing how to analyze traceroute output in L3VPN and look up CEF forwarding and MPLS/TE/SR/SR-TE forwarding for labels through a domain. Some basic examples of traffic engineering are used but the concepts lend the...
This document summarises various health checks that can be done on a Cisco VIM pod.
Cloud sanity checks the health status of network, storage and various openstack infrastructure components like mariadb, rabbitmq etc....
The following pre-requisites are necessary for the migration from RSP440 to RSP880-LT to be successful.
Make sure that you have console access to the router.
Verify that the system is running a minimum o...
BGP flowspec in a nutshell is a feature that will allow you to receive IPv4/IPv6 traffic flow specification (source X, destination Y, protocol UDP, source port A .. etc) and actions that need to be taken on that traffic (...
IntroductionWhile gNMI is fairly new, it's becoming more and more powerful. Its abilities to simplify network management by the use of protocol buffer files and standard definitions are enabling our customers to integrate a lot better in multi-vendor envi...