cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
588
Views
0
Helpful
1
Replies
seungyeul
Beginner

EoMPLS Monitoring in Remote PC

Hi dear all, I'm lion

Currently I am facing an issue in a EoMPLS network and I need ur help to solve this issue.

We wants to implement like below.

because Our ISP provides only EoMPLS Service.(Point-to-Point)

We have a four CE SW and Remote PC.

is it possible to commuicate using same IP Block ?

(between Hub CE(CE4,PC) and Spoke CE(CE1,CE2,CE3))

We donot want change our IP scheme and We want to monitor Spoke CE(CE1,CE2,CE3)) using PC.

Is it possible?

I heard EoMPLS Solution supports only Point-to-Point Service.

Diagram.png

1 REPLY 1
Atif Awan
Cisco Employee

EoMPLS is indeed point-to-point, however, in your particular topology if you put all your interfaces in the same VLAN on CE4 then you should be able to have one large Layer-2 domain with all your devices reachable to one another. I am not saying this is the ideal solution but it will meet your current requirement.

Atif