Hello All,
I have following set up. 2 XR routers are running isis.But ISIS adjacency is not coming up. I am not sure what configuration am I missing ?
I am using flexible cli configuration.
XRV1-------------XRV2
XRV1
-------------------------------------------
int gi0/0/0/0
ip address 100.10.20.1 255.255.255.0
no sh
int lo0
ip address 1.1.1.1 255.255.255.255
group test1
router isis '.*'
is-type level-2
address-family ipv4 unicast
metric-style wide
exit
address-family ipv6 unicast
single-topology
metric-style wide
exit
int 'GigabitEthernet.*'
address-family ipv4 unicast
metric 100 level 2
exit
address-family ipv6 unicast
metric 200 level 2
exit
int 'Loopback.*'
address-family ipv4 unicast
metric 100 level 2
exit
address-family ipv6 unicast
metric 200 level 2
exit
root
router isis 1
apply-group test1
net 49.0001.1111.1111.1111.00
int lo0
int gig0/0/0/0
exit
XRV2
--------------
int gi0/0/0/0
ip address 100.10.20.2 255.255.255.0
no sh
int lo0
ip address 2.2.2.2 255.255.255.255
exit
group test1
router isis '.*'
is-type level-2
address-family ipv4 unicast
metric-style wide
exit
address-family ipv6 unicast
single-topology
metric-style wide
exit
int 'GigabitEthernet.*'
address-family ipv4 unicast
metric 100 level 2
exit
address-family ipv6 unicast
metric 200 level 2
exit
int 'Loopback.*'
address-family ipv4 unicast
metric 100 level 2
exit
address-family ipv6 unicast
metric 100 level 2
exit
root
router isis 1
net 49.0001.2222.2222.2222.00
apply-group test1
int lo0
int gig0/0/0/0
exit
Thanks,
Sachin
