L2vpn xconnect config issue

[kcwannere]

Hi,

I am getting below error while pushing the l2vpn config on Cisco NCS5501 with ver.6.5.2. Please can someone help me understand and a possible resolution to this problem.

RP/0/RP0/CPU0:NCS5501(config)#show configuration failed
!! SEMANTIC ERRORS: This configuration was rejected by
!! the system due to semantic errors. The individual
!! errors with each failed configuration command can be
!! found below.

l2vpn
xconnect group xxxxxxxx
p2p xxxxxxxxxxxxxx
interface Bundle-Etherxxxxx
!!% Invalid argument: [xconnect_add_fwd_to_xc,2130]: "Failed to add forwarder to FWD DB"
interface TenGigExxxxxx
!!% Invalid argument: [xconnect_add_fwd_to_xc,2130]: "Failed to add forwarder to FWD DB"
!
p2p xxxxxxxxxxxxxxxx
interface Bundle-Etherxxxxxx
!!% Invalid argument: [xconnect_add_fwd_to_xc,2130]: "Failed to add forwarder to FWD DB"
interface TenGigExxxxxxxxxx
!!% Invalid argument: [xconnect_add_fwd_to_xc,2130]: "Failed to add forwarder to FWD DB"
!
!
!
end

[Ricardo Simba]

Hi Kcwannere,

Whats the output of your "show" command, from the global mode?

Best regards,

[kcwannere]

Hi Ricardo,

Thank you for working on this, are you asking about the l2vpn config that I am trying to drop in the box, as the box is throwing away error while I commit the changes.

Regards,

Kapil

[AnthonySylvester]

I would suggest that you configure your configuration in pieces and commit them that way. If that doesn’t help, you may restart l2vpn_mgr process “process restart l2vpn_mgr” during night or MW.

Let me know if that helps.

-Anthony Sylvester