Hi,
Iam trying to create 2000 LDP neighbors and iam getting this error below. Question is
1) whether 1000 ldp neighbor is hard limit on a 24x10GE line card, or this is just a software limitation which can potentially be bumped up from the default limitation of 1000?
2) Can i create LDP basic session using VLAN's ?
#show mpls ldp summary
Thu Mar 12 10:57:51.420 CDT
AFIs : IPv4
Routes : 4543
Neighbors : 1000
Hello Adj : 1009
Addresses : 11
Interfaces: 9 LDP configured
#show logging | utility tail
RP/0/RSP0/CPU0:Mar 12 10:51:25.536 CDT: mpls_ldp[1047]: %ROUTING-LDP-4-MAX_NEIGHBORS : VRF 'default' (0x60000000), Rejecting LDP neighbor (55.144.0.235): Reached maximum (1000) number of neighbors supported.
RP/0/RSP0/CPU0:Mar 12 10:52:25.585 CDT: mpls_ldp[1047]: %ROUTING-LDP-4-MAX_NEIGHBORS : VRF 'default' (0x60000000), Rejecting LDP neighbor (55.144.0.230): Reached maximum (1000) number of neighbors supported.
-Ramdas
