cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1252
Views
15
Helpful
16
Replies

MPLS backbone to support ipv6

NAVIN PARWAL
Level 2
Level 2

Folks,

We currently have MPLS backbone comprised of about 12 routers in the core. We could like to implement support for IPV6. Has anyone implemented this in their MPLS network yet. I know very few providers have deployed ipv6 support on their MPLS network. Could someone point out areas I should be focussing on to make this happen?

Thanks,

Parwal

16 Replies 16

12.2S would be suitable for the 7500 but not for the 7600. 12.2SXF would be required for the 7600.

Hope this helps,

Regards,
Harold Ritter, CCIE #4168 (EI, SP)

I appreciate your response to my questions. I had another question for you. I will surely rate this post.

I have 7600's and 7500's in my backbone and 7200's on the edge. My question is that when look at the feature navigator the 7600 with Sup 720 is missing a of basic features required to be a core router of an MPLS Backbone. Features like Traffic engineering fast reroute, MPLS enabled Netflow and missing for this platform, is this platform not a good candidate to be a Backbone router of a service provider offering MPLS services??? 7500 on the other hand seems to have support for the MPLS related features. Please give me your advice, i would highly appreciate it.