03-31-2012 01:09 PM
Hello. We have cisco 2921:
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1)
Technology Package License Information for Module:'c2900'
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc None None None
data None None None
I need to test "Configuring MPLS LDP Autoconfiguration with OSPF Interfaces" like this link:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_ldp_autoconfig.html
but in the global configuration mode "mpls ip" is not active:
C2921(config)#mpl?
% Unrecognized command
In the documentation I find that C2921 support MPLS, what is the problem ?
Solved! Go to Solution.
04-01-2012 03:08 AM
Hi Alex,
As you can see from the output you have posted yourself, it does not:
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc None None None
data None None None
This is also described in the following document:
You will need to obtain the DATA license in order to use the MPLS support.
Best regards,
Peter
03-31-2012 01:38 PM
Alex,
I suspect that the MPLS is supported in the DATA license. You will need to purchase the DATA license, or activate a temporary (evaluation) license if such is available.
Best regards,
Peter
04-01-2012 02:55 AM
our router have SEC/K9 license, this license not include Data feature ?
04-01-2012 03:08 AM
Hi Alex,
As you can see from the output you have posted yourself, it does not:
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc None None None
data None None None
This is also described in the following document:
You will need to obtain the DATA license in order to use the MPLS support.
Best regards,
Peter
04-01-2012 05:32 AM
thanks, you are right...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide