Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all.I have ASA 5525 with subinterfaces for internal VLANs and one interface is connected to ISP and is NAT'ing internal networks with dynamic NAT. Also I have global ACL's which permit traffic between a part of vlans and deny traffic between anoth...
Hello. I posted an example of "how have not to be" network topology, and unfurtunately I have this topology... Firstly I have to say that my switches are not manageable and don't support VLANs. So, I have 3 internal networks in the SiteA and one netw...
Hello.We have a 5 storey building.My question: Is a good idea to install one Aironet 3500 or 3600 series AP with multiple external antennas and to place each antena on every storey ?Maximum number of wireless clients will be ~200.You can see the desc...
Hello. We have cisco 2921:Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1)Technology Package License Information for Module:'c2900'----------------------------------------------------------------Tech...
hello, i have a WS-C2960G-48TC-L switch with (C2960-LANBASEK9-M), Version 12.2(53)SE2 IOS. I need to configure on his interfaces dot1x, but is not active all de options on the interface dot1x submenu:C2960G(config-if)#dot1x ? credentials Credent...
Thank you for your proposal. I'l implement VLANs there and it will work OK but until implementing VLANs I left the mikrotik to route traffic. I just asked what teoretically can be the problem. I understand tha interfaces are routed and have not to ma...
It is most likely that there is a very high amout of traffic that is being sent between the networks. Perhaps there could be a virus at work here?I don't think so, because routing internal networks vith a mikrotik router doesn't make any problems. ...
Hi. I don't know why you don't see the immage, I see it from different hosts and from different browsers. i consider that there is a loop because all switch interfaces start to blink very often and finnaly the network is down. In the network is not a...
