cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1410
Views
0
Helpful
2
Replies

MPLS packet drops

1pgordo
Level 1
Level 1

I have two ASR9000 running 5.1.3. They are connected back to back using mpls protocol.


When i enter the command 'show mpls forwarding summary' i've got the following output:


        sh mpls forwarding summary
        …
        Pkts dropped:    46958
        ...
        Failed lookups:  447

Does anyone know wich could be the cause for the drops and the failed lookups?

2 Replies 2

Vinit Jain
Cisco Employee
Cisco Employee

Could you please paste the complete output. 

The usual cases when you see the packet drops is when the LSP is not complete or the LFIB doesnt knows where to forward the packet. THis can be seen when there are LDP neighbor flaps seen on the router.

Regards

Vinit

Thanks
--Vinit

Hi Vinit,

follows the complete output as you asked for:

sh mpls forwarding summary
Fri May 27 09:20:42.450 UTC
Forwarding entries:
   Label switching: 10, protected: 0
   MPLS TE tunnel head: 0, protected: 0
   MPLS TE midpoint: 0, protected: 0
   MPLS TE internal: 0, protected: 0
   MPLS P2MP TE tunnel head: 0
   MPLS P2MP TE tunnel midpoint/tail: 0
   MPLS P2MP MLDP tunnel head: 0
   MPLS P2MP MLDP tunnel midpoint/tail: 0
Forwarding updates:
   messages: 910
      p2p updates: 1141
Labels in use:
   Reserved: 4
   Lowest: 0
   Highest: 16009
   Deleted stale label entries: 0

Pkts dropped:    47800
Pkts fragmented: 0
Failed lookups:  447

Best regards,

PGordo