MPLS - Traffic ENG on WS-C6509-NEB-A

[cannone78]

Hello everybody!

I'm finding an IOS to configure MPLS/Traffic Eng feature on a catalyst 6509 (I have a 6509-NEB-A with sup720/MSFC3 - PFC3A).

Using feature navigator I've check that the train 12.2(33)SXI Adv-IP-Serv or Adv Ent-Serv should support these feature (mpls, ldp, traffic engeneering...).

I've installed It but...I can't configure any feature about mpls!

Any uggestion?

Many thanks in advance for your support

[Giuseppe Larosa]

Hello Gianluca,

check the type of supervisor you have

sup 720 3B or better is required for MPLS on a C6500 chassis

see on one of our devices

sh module

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAD085003LD

2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL09018DKD

5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAD085201PZ

sh mpls forw | exclude ntagged

Local Outgoing Prefix Bytes tag Outgoing Next Hop

tag tag or VC or Tunnel Id switched interface

16 Pop tag 10.80.34.2/32 0 Po1 10.82.0.22

17 Pop tag 10.80.0.35/32 131148199 Po1 10.82.0.22

22 Pop tag 10.80.0.8/32 186 Gi1/8 10.52.132.41

24 451 10.80.0.2/32 416 Gi1/8 10.52.132.41

25 459 10.80.0.1/32 820 Gi1/8 10.52.132.41

Hope to help

Giuseppe

[cannone78]

Hello Giuseppe,

many thanks for your answer.

Gianluca