cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
719
Views
0
Helpful
2
Replies
g.grof
Beginner

Port-channel algorithm on 7200 or GSR


Hi,


Please help me to find out which is the algorithm used by 7200 or GSR on (GE) port-channel configuration!

GSR would be the P router, 7200 is the PE.


Topologie:


CE --- PE (7600) === P (GSR) === PE (7200) --- CE


7600 works well, but GSR and 7200 using only one link of two. This is an MPLS^VPN environment.

I used same source and different dst IP addresses during test.

Thank you for your help!


Gabor

2 REPLIES 2
Giuseppe Larosa
Hall of Fame Master

Hello Gabor,

C7200 and GSR are routers not multilayer switches I would suggest you to remove port-channel configuration and to use the two links as two parallel L3 links.

Hope to help

Giuseppe

Laurent Aubert
Cisco Employee

Hi,

ethernet bundling is not supported on 7200.

HTH

Laurent.