08-02-2016 12:51 AM
Hi!
I'm having a strange issue with mpls ldp label command. Cisco's website says this command was introducedn in IOS version 12.2(33)SRC
But as you can see I can't type this command.. I'm using GNS3.
Thanks
Solved! Go to Solution.
08-02-2016 05:57 AM
Hi
if its not there its not supported in that version its nothing to do with GNS3 as there full images not stripped down like the Linux IOUs , a lot of commands were removed between the progression of v12 to v15 it was huge change ]you can check and compare images with this tool and what commands they support and what they were changed too
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
08-02-2016 09:13 AM
Only Cisco could tell you why they removed it , lot of things disappeared and were added going from 12 - 15 , best thing is just check the feature navigator that gets updated more frequently than the docs
08-02-2016 05:57 AM
Hi
if its not there its not supported in that version its nothing to do with GNS3 as there full images not stripped down like the Linux IOUs , a lot of commands were removed between the progression of v12 to v15 it was huge change ]you can check and compare images with this tool and what commands they support and what they were changed too
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
08-02-2016 09:11 AM
Hi Mark, I've tested with 15.2 and it worked.. Can't understand why it is not working with 15.1... Cisco doc says it came out with 12.2...
08-02-2016 09:13 AM
Only Cisco could tell you why they removed it , lot of things disappeared and were added going from 12 - 15 , best thing is just check the feature navigator that gets updated more frequently than the docs
08-02-2016 09:16 AM
Thank you for helping me!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide