pseudowire-class command supported License

[dnsroot13]

Hi All,

I need to a quick inputs from you guys.I am having c2900-universalk9-mz.SPA.152-4.M4.bin IOS. (CISCO2921/K9)

the issue is I am unable to type pseudowire-class command. i searched few thing on cisco forums which they said its required data + security license but could not find anything which shows what if i have 3 license as mentioned below .

if any body can send  any document &  put some lights on the facts will be much appreciated . I am having currently uc+security+ ipbase enabled & data is not there.please find below details.

appreciate your quick inputs for the same

[dnsroot13]

Guys,

please anybody can  give his inputs on below

[eduardopozo56 · Accepted solution]

Hi,

If you go into the Cisco Feature navigator and fill all your IOS details on the "search by software", you can see that with the Universal (SECURITY+UC) you don't have support for "Any transport over MPLS (AToM)" which is the pseudowire command you are trying to implement

The Universal (SECURITY+UC+DATA) license has the support for AToM.

http://tools.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp

Summary: You need the Data license installed to configure AToM

Regards,

[Nguyen Ma]

Hi,

I met same issue. But when checking on Cisco Feature navigator, it showed 2911 Universal (SEC + UC) has AToM and L2TP also. Any bug on the navigator? please advise.

Thanks