cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
303
Views
1
Helpful
2
Replies

Segment Routing SR/LDP interworking problem with NX-OS

csaba.magdus1
Level 1
Level 1

Hi All,

I have created a lab in EVE-NG to test SR-LDP interworking. I configured an SR Mapping Server to advertise prefix-SIDs on behalf of non-SR routers. Only routers that run XE/XR software can get prefix-SIDs from the mapping server without problem but an NX-OS router can't. Is it possible that in NX-OS accepting SRMS advertisements does not supported? 

Thanks.

Csaba

1 Accepted Solution

Accepted Solutions

Harold Ritter
Cisco Employee
Cisco Employee

Hi @csaba.magdus1 ,

There is not support for SRMS in NX-OS as far as I know of.

Regards,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

View solution in original post

2 Replies 2

Harold Ritter
Cisco Employee
Cisco Employee

Hi @csaba.magdus1 ,

There is not support for SRMS in NX-OS as far as I know of.

Regards,

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

Hi Harold,

Thanks for your answer.

Regards,

Csaba