Which release does a ASR 1001/Version 03.16.01a.S support MPLS?
I have an ASR 1001(Cisco IOS XE Software, Version 03.16.01a.S/Cisco IOS Software Version 15.5(3)S1a).
I checked it, but can't configure 'MPLS ldp', and no MPLS command under the interface.
My question is which lowest release can support MPLS. I have spent hours to check, but not clear so far.
Router>sh version Cisco IOS XE Software, Version 03.16.01a.S - Extended Support Release Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S1a, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2015 by Cisco Systems, Inc. Compiled Wed 04-Nov-15 13:58 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2015 by cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0. The software code licensed under GPL Version 2.0 is free software that comes with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such GPL code under the terms of GPL Version 2.0. For more details, see the documentation or "License Notice" file accompanying the IOS-XE software, or the applicable URL provided on the flyer accompanying the IOS-XE software.
ROM: IOS-XE ROMMON
Router uptime is 58 minutes Uptime for this control processor is 59 minutes System returned to ROM by reload System image file is "bootflash:/asr1001-universalk9.03.16.01a.S.155-3.S1a-ext.bin" Last reload reason: PowerOn
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
Slot Type State Insert time (ago) --------- ------------------- --------------------- ----------------- 0 ASR1001 ok 01:03:19 0/0 ASR1001 ok 01:02:30 0/1 SPA-1X10GE-L-V2 ok 01:02:30 R0 ASR1001 ok, active 01:03:19 F0 ASR1001 ok, active 01:03:19 P0 ASR1001-PWR-AC ps, fail 01:03:01 P1 ASR1001-PWR-AC ok 01:03:00 P2 ASR1001-FANTRAY ok 01:03:02
Slot CPLD Version Firmware Version --------- ------------------- --------------------------------------- 0 10042219 15.2(1r)S R0 10042219 15.2(1r)S F0 10042219 15.2(1r)S
In scaled EVPN deployments it can be wise to name ESI that way to represent the site/physical port/etc it is attached to. Thus on some remote location you can easily verify where particular route/MAC is coming from. Similar to phone numbers, where...
Want to enable Feature EPFT with “routing-protocols-enable”. However ,it is throwing an error and ask to configure the following command: “non-subscriber-interfaces mac” which once enabled drops the traffic without any penalty.
XR-vm - CLI's
look for any process crash, review time stamp[if it is too old, then no immediate action needed]
verify if standby state is Ready and NSR-Ready
show proc cpu | exclude " 0%"
It's been a long standing ask for XR to support conditional route advertisements in BGP.
The expected option of using the
option in RPL currently can only be used at the default-inf...
On IOS-XR, Quality of Service has an extension to WRED (Weighted Random Early Detection) called Explicit Congestion Notification (ECN). ECN will mark packets instead of dropping them when the average queue length exceeds a specific threshold value. When c...